Six gear cars

Archive for April, 2010

How To Properly Care For Your New Alloy Wheels And Some Products To Help You Do The Job

There are different types of alloy wheel cleaners available in the market. Alloy wheels look great but if they are covered with grime and dust they will give a bad look of your car. A good car can be let down by ratty scuffed and tarnished wheels. Replacing the whole set of alloy wheels can cost hundreds of dollars and with good care of your allow wheels you can contribute to the beauty of your car. A good alloy wheel cleaner is essential for your car.

Regular cleanliness is required to get the optimal performance from your alloy wheels. The aluminum body wheels can vehicles can now be restored to their original beauty if you use a right cleaning product. Some of the best alloy wheel cleaners include the following.

Alloy Body cleaner

The alloy body cleaner is very powerful cleaner that uses a phosphoric blend of acids to remove the deposits of corrosion grime and dust.

Laser tech
The laser tech cleaner is a phosphoric based acidic cleaner that is used for the alloy wheels to give them a brightest look.

Alloyshine excell

The alloyshine excel product is an acid wheel cleaner perfect for removing the dust grime and corrosions from all types of wheels including steel painted and alloy.

Silicone Free dressing

The silicon dressing can be used on all types of rubber surfaces including tires. This product provides weather resistance long lasting effects.

Alloy Wheel Cleaner

This is a mild alloy wheel cleaner used for removing the brake dusts and road salts from the wheels.

Rubber Gloss

The rubber gloss product is specifically designed to increase the appearance of the rubber surfaces. It provides the excellent results on mats and mud flaps. The rubber gloss is silicon free and a non flammable solvent.

Tire Shine Pro

The Tire Shine Pro cleaner is blended with the fine oils to provide the long lasting weatherresistance shine.

Quick Wheel Detailer

It keeps the wheels sparkling every day and produces natural shine.

Clean Wheels

The clean wheels product brings the sparkle back to the dirty and deteriorated wheels.

Wheel Care

The wheel care is a professional wheel resin based wax. It makes the wheels easier to clean resists brake dust buildup and provides and long lasting protection.

MetalMate

This product has been tested and claimed as one of the best alloy wheel protection product. It makes the wheels really bright and it’s very easy to keep off the dust with MetalMate.

This only represents a sampling of the car care products available on the market today. There are many more available that you can find from the resource below.

About the writer:  Gregg Hall is an author living on the Treasure Coast of Florida. Now that you know more about alloy wheels be sure that you have quality Goodyear tires for your car by going to http://www.nsearch.com

How To Change Your Own Engine Oil

Most of us know that when the car beeps it is time to get gas but that is as far as our narrow scope on good car maintenance goes. For many a visit to the mechanic only happens when major car problems have occurred. Most mechanics would say that the majority of car problems could be avoided if the car owners only changed their motor oil on a regular basis. With the rising price of gas many Americans are taking the initiative to learn how to be more car repair friendly in order to avoid spending any extra dollars than they have to on their automobiles.

Everyone has heard that the first step to maintaining your cars healthy condition is by changing the motor oil regularly. And we all have seen those signs advertising a 10 minute oil change at local gas stations or quick stop car repairs. But what if theres a way to save 50 bucks and do it yourself? There is and its easy to do.

Here are the steps youll need to get you started in changing your own cars engine oil.

The first thing you will need to get started is your car owners manual. This will tell you how much and what kind of oil is required. You will need to go down to your local auto parts store and make sure you get the right filter for your vehicle. You will also need to purchase a funnel so that you dont get any oil spillage on your engine which could cause major problems. In addition you will also need a pair of filter pliers or a wrench because sometimes the lid to the oil is stubborn coming off. You will also need the right size socket for your specific vehicle. Note that some cars include the socket with the cars maintenance kit. If your car doesnt have this then you can always find one at the auto parts store. Also make sure to have a rag around to clean up any accidental spills that may occur.

Open up the cars hood and pull your car up onto a ramp. Make sure your emergency brake is on so that the car doesnt go anywhere while you are changing the oil. Use a drain pan to catch all the dirty oil and place it under the car by the drain bolt. Use a ratchet or a wrench to remove your cars drain plug bolt. When the oil is drained all the way down to a drip screw on the drain plug and tighten it with the ratchet or wrench. Next locate your cars oil filter and use your pliers or wrench to remove it. Before you install the new filter take some oil and use it as lube on the o ring of the filter. Then reinstall the new filter as tight as possible by hand.

Now that the hard part is done here comes the easy part. Remove the oil cap from the engine. Place the funnel in the hole and put in the specific amount of oil that your vehicle requires according to the owners manual. Screw on the engine oil cap. Start your engine and let it run for a few minutes. Then once you turn off your car check to see if you have the correct amount of oil in your engine. Congratulations! You have successfully changed your engine oil.

About the writer:nbsp;nbsp;Tim LaGanke Jr. is president of QuickChange Oil a 10 minute oil change company in Cleveland Ohio. QuickChange is currently seeking applicants to own an oil change franchise.
gankquickchangeoil.com

Gas Prices Breaking The Bank? How About A Water Powered Car?

We’re in a definite crisis here. Gas and oil prices are extremely high in the world. And consumers are looking high and low to find some relief. Companies have been making water powered cars for a very long time. And just now they’re strutting out on the public scene like a tourist in Miami.

People everywhere are perking their ears up and opening their eyes wide at the possibility of using water to run their cars instead of expensive fuels. It’s not complex at all to run a car on water. The cars just operate using hydrogen. The hydrogen is put into the car’s fuel. And on earth you just can’t run out of hydrogen. It’s in the form of water. And water is everywhere.

There’s a lot to smile about when it comes to water powered cars. They’re really great for the environment. A lot of regular cars fill the air with carbon dioxide as they run. Water powered cars are much better with carbon dioxide emissions. And people are saying they experience increased mileage when drive cars that are fueled by water.

Water powered cars are the same size as regular cars and they are designed the same way. They don’t look like alien air crafts or any other unconventional looking car you may have considered. Water cars look the same as the regular cars you are used to seeing on the roads. You may be able to pick a water car out on the roads. But that’s only because you’ll notice that water powered cars are so quiet in comparison to regular cars.

There’s really no question about it. Gas prices are increasing and people haven’t found a way to stop prices from going up. As an attempt to cure their money woes some people have begun purchasing hybrid cars or cars that run on electricity.

Others have gone out and bought things to turn their cars into cars that can operate on water. And it’s not abnormal for some people to shake their heads at the thought of a car running on water but there are many instances where this has occurred. Trucks drivers are converting their vehicles in to water cars. Since truck drivers drive so much they are very negatively affected by the increase in gas prices. So a truck that runs on water is much less pricey than a truck that runs solely on gas.

There are really two roads to go down when it comes to saving money on gas. You can purchase a hybrid car or make the car you have operate on gas and water. The option is up to you. You may find that converting your car to a car that runs on water is much less expensive than the hybrid car option. And you won’t have any problem finding a kit to turn your car into a water powered car. But you can’t just purchase a water car kit from anywhere. Go to a source that you can depend on.
You’ll have an easy time installing the kits. And if gas prices drop back down again you can always reverse the process.

About the writer:  On my website http://watercarproject.com I review the top 3 conversion guides. For under 150 you can buy all needed parts to convert your vehicle into a car running on fuel and slash your gas bills by as much as 50 as a result!